Ad details:
The saw’s large 12-inch blade, powerful 3-horsepower motor and dual slide rail permits crosscutting boards up to 4-1/2 inches thick by 12 inches long. When set for a 45-degree miter-cut, it’ll cut up to 4 inches thick by 8-1/2 inches long. At a 45-degree bevel, the saw’s capacity is 2-3/4 inches by 12 inches. And when you set both the miter and bevel angles for a compound cut, the saw will cut up to 2-3/4 inches by 8-1/2 inches. This is the ideal tool for installing crown molding. It’ll cut crown up to 12 inches wide when the molding is laid flat on the worktable, and up to 6 inches wide when it’s held at an angle against the saw fence.

Technical Details
12-inch dual bevel compound miter saw with laser tracking
Wide miter range at 52 degrees left and right; 15 amp; 3,800 rpm; 3-horsepower
Heavy cast-iron base; carbide-tipped saw blade
Includes saw, blade, dust bag, elbow wrench set, flip-over crown stops
25-1/2-inch base and extenders to 40-inches long; 59 pounds; 1-year warranty